Stainless Steel Screws - Westfield Fasteners Ltd

Fastener Material Key
A2	A2 Stainless Steel - Also known as grade 304 or 18/8. A general purpose grade of stainless steel.
A4	A4 Stainless Steel - Also known as grade 316 or 18/8/3. A higher corrosion resistant, marine grade of stainless steel.

Pozidrive Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a pozi-driv countersunk head. The countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Standard A2 stainless steel and the marine grade A4 stainless steel are particularly good where the screw heads are visible in outdoor or in humid/wet environments, such as bathrooms and kitchens. Where we have part thread versions, we have listed them separately below. We also stock the stainless steel torx drive version of these wood screws. Please note that the head shape can vary between a countersunk, double countersunk, and bugle shape.

A2

3

3.5

4

4.5

5

6

Pozidrive Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a pozi-driv countersunk head. The countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Standard A2 stainless steel and the marine grade A4 stainless steel are particularly good where the screw heads are visible in outdoor or in humid/wet environments, such as bathrooms and kitchens. Where we have part thread versions, we have listed them separately below. We also stock the stainless steel torx drive version of these wood screws. Please note that the head shape can vary between a countersunk, double countersunk, and bugle shape.

A2

3

3.5

4

4.5

5

6

Pozidrive Pan Head Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a pozi-drive pan shaped head. Please note that these screws may include a partially threaded shank.

A2

3

3.5

4

4.5

5

6

Pozidrive Pan Head Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a pozi-drive pan shaped head. Please note that these screws may include a partially threaded shank.

A2

3

3.5

4

4.5

5

6

Torx Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a Torx drive; also known as star, 6 lobe, and hexalobular internal. The torx drive is designed to prevent "cam out", which makes them ideal for use with modern drill/drivers. The countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Please note that the head shape can vary between a countersunk, double countersunk, and bugle shape.

A2

3

3.5

4

4.5

5

6

8

10

Torx Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a Torx drive; also known as star, 6 lobe, and hexalobular internal. The torx drive is designed to prevent "cam out", which makes them ideal for use with modern drill/drivers. The countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Please note that the head shape can vary between a countersunk, double countersunk, and bugle shape.

A2

3

3.5

4

4.5

5

6

8

10

Coach Screws DIN 571 in A2 Stainless Steel

Coach screws, also known as lag bolts or lag screws, are a heavy duty wood screw with a hexagonal head. They are usually employed in joining timbers or attaching metalwork to timber. Available in a broad range of sizes and materials for use in projects of varying scale and environments.

A2

5

6

8

10

12

Coach Screws DIN 571 in A2 Stainless Steel

Coach screws, also known as lag bolts or lag screws, are a heavy duty wood screw with a hexagonal head. They are usually employed in joining timbers or attaching metalwork to timber. Available in a broad range of sizes and materials for use in projects of varying scale and environments.

A2

5

6

8

10

12

Slotted Countersunk Wood Screws DIN 97 in A2 Stainless Steel

Slotted Countersunk Woods Screw giving a flush, smooth and snagfree finish when used. Please refer to dimensions on the datasheet when replacing existing wood screws, as there can be variation between actual and nominal diameters.

A2

2.5

3

3.5

4

4.5

5

5.5

6

8

Slotted Countersunk Wood Screws DIN 97 in A2 Stainless Steel

Slotted Countersunk Woods Screw giving a flush, smooth and snagfree finish when used. Please refer to dimensions on the datasheet when replacing existing wood screws, as there can be variation between actual and nominal diameters.

A2

2.5

3

3.5

4

4.5

5

5.5

6

8

Slotted Round Head Wood Screws DIN 96 in A2 Stainless Steel

Slotted Round Head Wood Screw. Round/Dome shaped head gives an attractive finish when fitted. Please refer to dimensions on the data sheet when replacing existing wood screws, as there can be variation between actual and nominal diameters.

A2

2.5

3

3.5

4

4.5

5

5.5

6

Slotted Round Head Wood Screws DIN 96 in A2 Stainless Steel

Slotted Round Head Wood Screw. Round/Dome shaped head gives an attractive finish when fitted. Please refer to dimensions on the data sheet when replacing existing wood screws, as there can be variation between actual and nominal diameters.

A2

2.5

3

3.5

4

4.5

5

5.5

6

Slotted Raised Countersunk Wood Screws DIN 95 in A2 Stainless Steel

Slotted Raised Countersunk Wood Screw giving an attractive finish when fitted. Please refer to dimensions on the datasheet when replacing existing wood screws, as there can be variation between actual and nominal diameters.

A2

2.5

3

3.5

4

4.5

5

5.5

6

8

Slotted Raised Countersunk Wood Screws DIN 95 in A2 Stainless Steel

Slotted Raised Countersunk Wood Screw giving an attractive finish when fitted. Please refer to dimensions on the datasheet when replacing existing wood screws, as there can be variation between actual and nominal diameters.

A2

2.5

3

3.5

4

4.5

5

5.5

6

8

Pozidrive Raised Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a pozi-drive raised countersunk head. Raised countersunks tend to be used where the screw head is going to be seen, as it gives a more attractive look than the flat countersunk and a softer edge. A countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Please note, these screws can sometimes come with a partially threaded shank.

A2

3

3.5

4

4.5

5

6

Pozidrive Raised Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a pozi-drive raised countersunk head. Raised countersunks tend to be used where the screw head is going to be seen, as it gives a more attractive look than the flat countersunk and a softer edge. A countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Please note, these screws can sometimes come with a partially threaded shank.

A2

3

3.5

4

4.5

5

6

Torx Raised Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a torx drive raised countersunk head. Raised countersunks tend to be used where the screw head is going to be seen, as it gives a more attractive look than the flat countersunk and a softer edge. A countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Please note, these screws can sometimes come with a partially threaded shank.

A2

3

3.5

4

4.5

5

6

Torx Raised Countersunk Chipboard Screws in A2 Stainless Steel

General purpose wood screws with a torx drive raised countersunk head. Raised countersunks tend to be used where the screw head is going to be seen, as it gives a more attractive look than the flat countersunk and a softer edge. A countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Please note, these screws can sometimes come with a partially threaded shank.

A2

3

3.5

4

4.5

5

6

Square Hook with Wood Thread

Square hooks, also known as L hooks and square cup hooks, are made from A2 or 304 stainless steel and are useful for a multitude of jobs, both inside and outdoors. With their sharp point and woodscrew end, the square hooks can be turned straight into wood and can also be used in masonry and concrete when employed with a wall plug. When used with hard woods, a pilot hole will help the square hook get a grip into the wood. A pilot hole can be made with a bradawl or small drill bit.

Square Hook

Square Hook with Wood Thread

#Spiel_m_Woodscrew_SqHook { padding:0px; max-height:75px; min-height:75px }

Square hooks, also known as L hooks and square cup hooks, are made from A2 or 304 stainless steel and are useful for a multitude of jobs, both inside and outdoors. With their sharp point and woodscrew end, the square hooks can be turned straight into wood and can also be used in masonry and concrete when employed with a wall plug. When used with hard woods, a pilot hole will help the square hook get a grip into the wood. A pilot hole can be made with a bradawl or small drill bit.

Square Hook

Gate Hook and Eyes with Wood Thread

Gate and shutter hook with two eye screws and wood threads, in A2 or 304 stainless steel. Also known as cabin hooks and eye latches. Useful for lightweight duties holding gates, doors and hatches open for both outdoor and indoor environments.

Gate Hook & Eyes

Gate Hook and Eyes with Wood Thread

#Spiel_m_Woodscrew_GateHook-Eye { padding:0px; max-height:75px; min-height:75px }

Gate and shutter hook with two eye screws and wood threads, in A2 or 304 stainless steel. Also known as cabin hooks and eye latches. Useful for lightweight duties holding gates, doors and hatches open for both outdoor and indoor environments.

Gate Hook & Eyes

	on UK orders of over £40 nett.
	on orders to Sweden over £80 nett.