Home   /   Bolts and Machine Screws - Metric   /   Hex Head Setscrews DIN 933 (ISO 4017) M18 in Zinc Flake coated high tensile steel class 10

 
Order List Summary
Goods Total   =  £ 
Delivery   =   
VAT @%   =  £ 
Grand Total  = £
 
Payments secured by PaymentSense Merchant Services
Free Delivery
on UK orders of over £40 nett.
on EU orders of over £60 nett.

Hex Head Setscrews DIN 933 (ISO 4017) M18 in Zinc Flake coated high tensile steel class 10

Commonly referred to as a setscrew or simply as a bolt. The fully threaded DIN 933 or ISO 4017 should not be confused with its DIN 931 equivalent. A standard spanner or ratchet is typically used to fit this product. Used for decades on all types of assembly throughout the world. As with the DIN 931 hex bolt, the hex drive allows a higher torque to be applied. All parts are to DIN 933 except where shown otherwise. The alternative standard ISO 4017 specifies differences in head dimensions for M10, M12 and M14 thread diameters from DIN 933.
Hex Head Setscrews DIN 933 (ISO 4017) in ZnFlk-10.9 image
technical drawing of Hex Head Setscrews DIN 933 (ISO 4017)
Technical Summary
d nominal diameter M18
thread pitch thread pitch 2.50
k max. maximum head height 11.5
s drive size 27
e width across corners 30.14
Standard DIN 933 (ISO 4017)
Material Zinc Flake coated high tensile steel class 10
all dimensions in millimetres (mm)
datasheet
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Hex Head Setscrews DIN 933 (ISO 4017)
Technical Summary
d nominal diameter M18
thread pitch thread pitch 2.50
k max. maximum head height 11.5
s drive size 27
e width across corners 30.14
Standard DIN 933 (ISO 4017)
Material Zinc Flake coated high tensile steel class 10
all dimensions in millimetres (mm)
datasheet