Home   /   Bolts and Machine Screws - Metric   /   Nylon (polyamide) M10 Hex Head Bolts DIN 931 (ISO 4014)

Nylon (polyamide) M10 Hex Head Bolts DIN 931 (ISO 4014)

The most common type of fastener, a hex head bolt is designed to be tightened with a standard spanner or ratchet and socket. Popularly used in all assemblies, a standard hex bolt is a staple across the world. Manufactured to ISO 4014 or DIN 931, and therefore includes an unthreaded section of the shaft. A hex drive permits a greater torque load to be applied to the joint over most other drive types. Please note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard specified.
Hex Head Bolts DIN 931 (ISO 4014) in Nylon image
technical drawing of Hex Head Bolts DIN 931 (ISO 4014)
Technical Summary
d nominal diameter M10
thread pitch thread pitch 1.50
b min. <= 125 thread (bolt lengths <= 125) 26
b min. > 125 thread (bolt lengths > 125) 32
s drive size 16(17)
k min. minimum head height 6.22
e width across corners 18.90
Standard Sim. DIN 931
Material Nylon (polyamide)
all dimensions in millimetres (mm)
datasheet
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Hex Head Bolts DIN 931 (ISO 4014)
Technical Summary
d nominal diameter M10
thread pitch thread pitch 1.50
b min. <= 125 thread (bolt lengths <= 125) 26
b min. > 125 thread (bolt lengths > 125) 32
s drive size 16(17)
k min. minimum head height 6.22
e width across corners 18.90
Standard Sim. DIN 931
Material Nylon (polyamide)
all dimensions in millimetres (mm)
datasheet