Home   /   Bolts and Machine Screws - Metric   /   Machine Screw Phillips Countersunk M6 x 30mm in A2 Stainless - DIN 965H

Machine Screw Phillips Countersunk M6 x 30mm in A2 Stainless - DIN 965H

A popular machine screw with a phillips drive. The countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. These items are always fully threaded. Conforms to ISO 7046 parts 1 & 2 or DIN 965H. Typically found on consumer electronics and other small machinery where high torque fasteners are not necessary.
Phillips Csk Machine Screws ISO 7046 part 1 & 2 (DIN 965H) in A2 image
technical drawing of Phillips Csk Machine Screws ISO 7046 part 1 & 2 (DIN 965H)
Technical Summary
d nominal diameter M6
dk head diameter 11.0
k max. maximum head height 3.00
b min. minimum thread length 28
s drive size P 3
Standard ISO 7046 part 1 & 2 (DIN 965H)
Material A2 Stainless Steel
all dimensions in millimetres (mm)
datasheet
Description Sale Qtys Qty Price Breakdown Despatch Estimate
Machine Screw Phillips Countersunk M6 x 30mm in A2 Stainless
(WF1958)
£2.99
Machine Screw Phillips Countersunk M6 x 30mm in A2 Stainless   (WF1958)
£2.99
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Phillips Csk Machine Screws ISO 7046 part 1 & 2 (DIN 965H)
Technical Summary
d nominal diameter M6
dk head diameter 11.0
k max. maximum head height 3.00
b min. minimum thread length 28
s drive size P 3
Standard ISO 7046 part 1 & 2 (DIN 965H)
Material A2 Stainless Steel
all dimensions in millimetres (mm)
datasheet