Home   /   Bolts and Machine Screws - Metric   /   Hex Bolt Part Thread M8 x 240mm in A4-80 Stainless - DIN 931 / ISO 4014

Hex Bolt Part Thread M8 x 240mm in A4-80 Stainless - DIN 931 / ISO 4014

The most common type of fastener, a hex head bolt is designed to be tightened with a standard spanner or ratchet and socket. Popularly used in all assemblies, a standard hex bolt is a staple across the world. Manufactured to ISO 4014 or DIN 931, and therefore includes an unthreaded section of the shaft. A hex drive permits a greater torque load to be applied to the joint over most other drive types.
Hex Head Bolts ISO 4014 (DIN 931) in A4-80 image
technical drawing of Hex Head Bolts ISO 4014 (DIN 931)
Technical Summary
d nominal diameter M8
b min. (l <= 125) 22
b min. (l > 125) 28
s drive size 13
k min. minimum head height 5.15
e width across corners 14.38
Standard ISO 4014 (DIN 931)
Material A4-80 Stainless Steel
all dimensions in millimetres (mm)
datasheet
Description Sale Qtys Qty Price Breakdown Despatch Estimate
Hex Bolt Part Thread M8 x 240mm in A4-80 Stainless
(WF40019)
£9.80
Hex Bolt Part Thread M8 x 240mm in A4-80 Stainless   (WF40019)
£9.80
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Hex Head Bolts ISO 4014 (DIN 931)
Technical Summary
d nominal diameter M8
b min. (l <= 125) 22
b min. (l > 125) 28
s drive size 13
k min. minimum head height 5.15
e width across corners 14.38
Standard ISO 4014 (DIN 931)
Material A4-80 Stainless Steel
all dimensions in millimetres (mm)
datasheet