Home   /   Bolts and Machine Screws - Metric   /   Hex Head Bolts ISO 4014 (DIN 931) M5 in A4-80 Stainless Steel

Hex Head Bolts ISO 4014 (DIN 931) M5 in A4-80 Stainless Steel

The most common type of fastener, a hex head bolt is designed to be tightened with a standard spanner or ratchet and socket. Popularly used in all assemblies, a standard hex bolt is a staple across the world. Manufactured to ISO 4014 or DIN 931, and therefore includes an unthreaded section of the shaft. A hex drive permits a greater torque load to be applied to the joint over most other drive types.
Hex Head Bolts ISO 4014 (DIN 931) in A4-80 image
technical drawing of Hex Head Bolts ISO 4014 (DIN 931)
Technical Summary
d thread diameter M5
b (l <= 125) 16
b (l > 125) -
s drive size 8
k min. minimum head height 3.35
e width across corners 8.79
Standard ISO 4014 (DIN 931)
Material A4-80 Stainless Steel
all dimensions in millimetres (mm)
datasheet
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Hex Head Bolts ISO 4014 (DIN 931)
Technical Summary
d thread diameter M5
b (l <= 125) 16
b (l > 125) -
s drive size 8
k min. minimum head height 3.35
e width across corners 8.79
Standard ISO 4014 (DIN 931)
Material A4-80 Stainless Steel
all dimensions in millimetres (mm)
datasheet