Home   /   Bolts and Machine Screws - Metric   /   Hex Head Bolts ISO 4014 (DIN 931) M30 in A4-80 Stainless Steel

Hex Head Bolts ISO 4014 (DIN 931) M30 in A4-80 Stainless Steel

The most common type of fastener, a hex head bolt is designed to be tightened with a standard spanner or ratchet and socket. Popularly used in all assemblies, a standard hex bolt is a staple across the world. Manufactured to ISO 4014 or DIN 931, and therefore includes an unthreaded section of the shaft. A hex drive permits a greater torque load to be applied to the joint over most other drive types.
Hex Head Bolts ISO 4014 (DIN 931) in A4-80 image
technical drawing of Hex Head Bolts ISO 4014 (DIN 931)
Technical Summary
d nominal diameter M30
b min. (l <= 125) 66
b min. (l > 125) 72
s drive size 46
k min. minimum head height 18.28
e width across corners 50.85
Standard ISO 4014 (DIN 931)
Material A4-80 Stainless Steel
all dimensions in millimetres (mm)
datasheet
Description Sale Qtys Qty Price Breakdown Despatch Estimate
Hex Bolt Part Thread M30 x 80mm in A4-80 Stainless
(WF39977)
£0.00
Hex Bolt Part Thread M30 x 90mm in A4-80 Stainless
(WF39978)
£0.00
Hex Bolt Part Thread M30 x 100mm in A4-80 Stainless
(WF39966)
£0.00
Hex Bolt Part Thread M30 x 110mm in A4-80 Stainless
(WF39967)
£0.00
Hex Bolt Part Thread M30 x 120mm in A4-80 Stainless
(WF39968)
£0.00
Hex Bolt Part Thread M30 x 130mm in A4-80 Stainless
(WF39969)
£0.00
Hex Bolt Part Thread M30 x 140mm in A4-80 Stainless
(WF39970)
£0.00
Hex Bolt Part Thread M30 x 150mm in A4-80 Stainless
(WF39971)
£0.00
Hex Bolt Part Thread M30 x 160mm in A4-80 Stainless
(WF39972)
£0.00
Hex Bolt Part Thread M30 x 170mm in A4-80 Stainless
(WF39973)
£0.00
Hex Bolt Part Thread M30 x 180mm in A4-80 Stainless
(WF39974)
£0.00
Hex Bolt Part Thread M30 x 190mm in A4-80 Stainless
(WF39975)
£0.00
Hex Bolt Part Thread M30 x 200mm in A4-80 Stainless
(WF39976)
£0.00
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Hex Head Bolts ISO 4014 (DIN 931)
Technical Summary
d nominal diameter M30
b min. (l <= 125) 66
b min. (l > 125) 72
s drive size 46
k min. minimum head height 18.28
e width across corners 50.85
Standard ISO 4014 (DIN 931)
Material A4-80 Stainless Steel
all dimensions in millimetres (mm)
datasheet