Home   /   UNC Bolts, Nuts and Washers   /   UNC Phillips Fillister Head Machine Screws ASME B18.6.3 2-56 inch in A2 Stainless Steel

 
Order List Summary
Goods Total   =  £ 
Delivery   =   
VAT @%   =  £ 
Grand Total  = £
 
Payments secured by PaymentSense Merchant Services
Free Delivery
on UK orders of over £40 nett.
on EU orders of over £60 nett.

UNC Phillips Fillister Head Machine Screws ASME B18.6.3 2-56 inch in A2 Stainless Steel

UNC Phillips Fillister machine screws have a large cylindrical head, with a slightly convex top surface. Fillister head screws are the preferred head type for counterbored holes and can also be used for protecting a surface by raising the level which the screw diver is used to tighten the fixing. They are similar to a Pan head machine screw, but with greater side height. Height to diameter ratio is larger than a cheese head. Imperial Unified Coarse thread version.
Image of UNC Phillips Fillister Head Machine Screws ASME B18.6.3 in A2 image
technical drawing of UNC Phillips Fillister Head Machine Screws ASME B18.6.3
Technical Summary
d nominal diameter 2-56
t.p.i threads per inch 56
dk max. (inch) head diameter 0.140
A max. (inch) dimension A maximum 0.062
k max. (inch) head height 0.083
Material A2 Stainless Steel
all dimensions in inches
datasheet
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of UNC Phillips Fillister Head Machine Screws ASME B18.6.3
Technical Summary
d nominal diameter 2-56
t.p.i threads per inch 56
dk max. (inch) head diameter 0.140
A max. (inch) dimension A maximum 0.062
k max. (inch) head height 0.083
Material A2 Stainless Steel
all dimensions in inches
datasheet