Home   /   Bolts and Machine Screws - Metric   /   Hex Head Setscrews ISO 4017 (DIN 933) M2.5 in Nylon (polyamide)

Hex Head Setscrews ISO 4017 (DIN 933) M2.5 in Nylon (polyamide)

Commonly referred to as a setscrew or simply as a bolt. The fully threaded ISO 4017 or DIN 933 should not be confused with it's DIN 931 equivalent. A standard spanner or ratchet is typically used to fit this product. Used for decades on all types of assembly throughout the world. As with the DIN 931 hex bolt, the hex drive allows a higher torque to be applied.
Hex Head Setscrews ISO 4017 (DIN 933) in Nylon image
technical drawing of Hex Head Setscrews ISO 4017 (DIN 933)
Technical Summary
d nominal diameter M2.5
k max. maximum head height 1.7
s drive size 5
e width across corners 5.45
Standard ISO 4017 (DIN 933)
Material Nylon (polyamide)
all dimensions in millimetres (mm)
datasheet
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Hex Head Setscrews ISO 4017 (DIN 933)
Technical Summary
d nominal diameter M2.5
k max. maximum head height 1.7
s drive size 5
e width across corners 5.45
Standard ISO 4017 (DIN 933)
Material Nylon (polyamide)
all dimensions in millimetres (mm)
datasheet