Home   /   Pins and Clips   /   Cotter Pins (DIN 94) 13 in A2 Stainless Steel

Cotter Pins (DIN 94) 13 in A2 Stainless Steel

Cotter Pins, also known as Split Pins are designed to be inserted through a hole and bent to secure in place, they are commonly made from wire which is semi-circular in cross section and square cut at the end, other specialist end finishes include Mitre or Bevel. Lengths are measured from the end of the tines to the point the base of the eyelet hole contacts with the host material. An unthreaded fastener solution for single use, as bending fatigue can cause failure if re-used.
Cotter Pins (DIN 94) in A2 image
technical drawing of Cotter Pins (DIN 94)
Technical Summary
d nom. nominal diameter 13
d max. maximum diameter 12.4
d min. minimum diameter 12.1
A max. max. dimension 6.3
A min. min. dimension 3.20
B approx. dimension approx. 26.0
C max. max. dimension 24.8
C min. min. dimension 21.7
Material A2 Stainless Steel
all dimensions in millimetres (mm)
datasheet
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Cotter Pins (DIN 94)
Technical Summary
d nom. nominal diameter 13
d max. maximum diameter 12.4
d min. minimum diameter 12.1
A max. max. dimension 6.3
A min. min. dimension 3.20
B approx. dimension approx. 26.0
C max. max. dimension 24.8
C min. min. dimension 21.7
Material A2 Stainless Steel
all dimensions in millimetres (mm)
datasheet